Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions to Remove Roof Bars on a Volkswagen Touran

Model: Volkswagen Touran MK 1, 1T - Years 2003-2015
Part: Roof rack bars

Today, you will learn how to remove the roof bars from a Volkswagen Touran by following these simple instructions. First, get inside the vehicle and remove the plastic caps marked airbag on the pillars using a thin lever; then unscrew the Torx screws located underneath with a T25 spanner. At this point, remove the pillars and then the sun visors; now remove the roof handles by unscrewing the fixing screws, and also take out the seatbelt pillars. Finally, unscrew the fixing bolts of the roof bars to remove them!

Updated on 1 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Install Roof Bars on a Volkswagen Touran
How to Install Roof Bars on a Volkswagen Touran
Volkswagen Touran (2015-2024 / 5T, MK 2) This brief guide outlines the main steps to install roof bars or roof racks on a Volkswagen Touran; it is important to note that each model of roof b…
Guide to disassembling the front bumper of the Volkswagen Touran.
Guide to disassembling the front bumper of the Volkswagen Touran.
Volkswagen Touran (2003-2015 / MK 1, 1T) The instructions in this guide will show us the process of disassembling and replacing the front bumper of the Volkswagen Touran. First, we open the …
How to remove the rear light of a Volkswagen Touran.
How to remove the rear light of a Volkswagen Touran.
Volkswagen Touran (2015-2024 / 5T, MK 2) To remove the rear light of a Volkswagen Touran, first, we need to open the tailgate. We see that on the inner side of the light there is a rectangul…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos