Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Airbag from a Volkswagen Touran MK2

Model: Volkswagen Touran 5T, MK 2 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Airbag

See other generations:
Video tutorial

This video shows how to remove the airbag from a Volkswagen Touran MK2 from its housing; the same method can also be followed for various models of the Golf, Amarok, and Caddy. On the back of the steering wheel, there are two springs located at opposite ends of the wheel, which can be accessed with thin screwdrivers.

Entering this housing, as seen in the video, unclip each of the two springs, allowing the airbag to detach. Now pull it towards you and disconnect the electrical connector located inside the housing.


Updated on 7 November 2026 by ScegliAuto


Related tutorials

Replacing the Steering Angle Sensor on the Volkswagen Touran
Replacing the Steering Angle Sensor on the Volkswagen Touran
Volkswagen Touran (2003-2015 / 1T, MK 1) Today's instructions will guide you through removing and replacing the steering angle sensor on the Volkswagen Touran. First, get into the vehicle an…
Removing the Airbag and Steering Wheel from a Volkswagen Touran
Removing the Airbag and Steering Wheel from a Volkswagen Touran
Volkswagen Touran (2003-2015 / 1T, MK 1) Today, you will learn how to remove the steering wheel airbag from a Volkswagen Touran; once removed, you can also detach the steering wheel in a few…
How to remove the steering wheel airbag from a Volkswagen Touran?
How to remove the steering wheel airbag from a Volkswagen Touran?
Volkswagen Touran (2003-2015 / 1T, MK 1) To remove the steering wheel airbag from a Volkswagen Touran, insert a screwdriver into the hole located at the back of the steering wheel, above the…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos