Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the steering wheel airbag from a Volkswagen Touran?

Model: Volkswagen Touran 1T, MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Steering wheel

See other generations:
Video tutorial

To remove the steering wheel airbag from a Volkswagen Touran, insert a screwdriver into the hole located at the back of the steering wheel, above the column. First, turn the steering wheel fully to the right and detach the right side of the airbag, then turn the steering wheel fully to the left to detach the left side of the airbag.

At this point, the airbag can be pulled from its seat, and to remove it completely, it will be necessary to disconnect the relevant connector. Once replaced, it can be reinserted by locking it into its seat and connecting the connector.


Updated on 21 April 2026 by ScegliAuto


Related tutorials

Removing the Airbag and Steering Wheel from a Volkswagen Touran
Removing the Airbag and Steering Wheel from a Volkswagen Touran
Volkswagen Touran (2003-2015 / 1T, MK 1) .. Today, you will learn how to remove the steering wheel airbag from a Volkswagen Touran; once removed, you can also detach the.. …
How to Remove the Airbag from a Volkswagen Touran MK2
How to Remove the Airbag from a Volkswagen Touran MK2
Volkswagen Touran (2015-2024 / 5T, MK 2) This video shows how to remove the airbag from a Volkswagen Touran MK2 from its housing; the same method can also be followed for various models of t…
Replacing the Steering Angle Sensor on the Volkswagen Touran
Replacing the Steering Angle Sensor on the Volkswagen Touran
Volkswagen Touran (2003-2015 / 1T, MK 1) Today's instructions will guide you through removing and replacing the steering angle sensor on the Volkswagen Touran. First, get into the vehicle an…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos