Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Interior Pillar of a Volkswagen Golf 5

Model: Volkswagen Golf MK 5, Golf 5, Golf V - Years 2003-2008

In this video, you will see how to remove the interior pillar of a fifth-generation Volkswagen Golf by following these simple steps. First, get inside the vehicle and use a plastic lever to remove the side cover where the fuses are located; then remove the adjacent plastic trim. At this point, pry on the sides of the airbag label found on the pillar and unscrew the screw inside using a T20 Torx screwdriver; finally, pry on the sides of the plastic pillar to remove it, as shown in the video!

Updated on 1 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Headlining Panel on the Volkswagen Golf 5
How to Remove the Headlining Panel on the Volkswagen Golf 5
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) This video provides step-by-step instructions for removing the headlining panel, commonly referred to as the headlining, on the Volkswagen Golf fifth…
How do you replace the sky of the Volkswagen Golf?
How do you replace the sky of the Volkswagen Golf?
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) The procedure for replacing the headliner on the Volkswagen Golf involves removing all components that prevent the removal of the interior ceiling li…
Removal of the Headlining of the Volkswagen Golf
Removal of the Headlining of the Volkswagen Golf
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) Below are step-by-step instructions on how to remove and replace the headlining of the Volkswagen Golf. First, get inside the vehicle and start remov…

    Frequently Asked Questions

    • Golf 1997-2003 - How many liters of fuel reserve does the Volkswagen Golf have? Read answer
    • Golf 2019-2026 - What problems does the Volkswagen Golf 8 infotaintment system have? Read answer

How to reset the tyre pressure warning light on the Dacia Sandero?

To reset the tyre pressure warning light on the Dacia Sandero, inflate all the tyres to the pressure indicated on the label on the driver's door. Once the tyres are inflated, turn on the ignition and navigate through the menu using the controls on the right side of the steering wheel. Scroll with the arrows to find the tyre pressure option: by holding down the OK button located on the right side of the steering wheel, you can reset the warning light.

Watch the video!


by ScegliAuto

More videos