Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Front Headlight from Volkswagen Caddy

Model: Volkswagen Caddy 2K, MK 3 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Headlight

See other generations:
Video tutorial

Today, you will see how to remove the front headlight from a 2012 Volkswagen Caddy, following these simple instructions. First, open the bonnet of the vehicle and remove all the screws found on the top of the bumper using a screwdriver or Torx spanner; then unscrew the fastening screws located on the wing to detach the bumper from the sides.

At this point, after removing all the screws securing the front lamp, disconnect the electrical connector of the bulbs to remove the front optical unit!


Updated on 2 April 2026 by ScegliAuto


Related tutorials

How do you replace the headlight bulb of the Volkswagen Caddy?
How do you replace the headlight bulb of the Volkswagen Caddy?
Volkswagen Caddy (2003-2020 / 2K, MK 3) The procedure for replacing the headlight bulb of the Volkswagen Caddy can be carried out by opening the hood, so that access to the inside of the op…
How to Replace the Headlight Bulb on the Volkswagen Caddy?
How to Replace the Headlight Bulb on the Volkswagen Caddy?
Volkswagen Caddy (2003-2020 / 2K, MK 3) To replace the headlight bulb on the Volkswagen Caddy, open the bonnet to access the inside of the headlight unit. You will need to detach the corres…
Replacing Front Headlight Bulb on Volkswagen Caddy
Replacing Front Headlight Bulb on Volkswagen Caddy
Volkswagen Caddy (2003-2020 / 2K, MK 3) In this video, we will see how to remove the front headlight bulb on a third-generation Volkswagen Caddy. First, open the bonnet from the inside: in …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos