Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Fox
    4. : Low beam replacement on Volkswagen Fox

Volkswagen Fox - Video tutorial

Model: Volkswagen Fox MK 1 - Years 2003-2011
Part: Headlight bulb
Operation: Low beam replacement on Volkswagen Fox

Raise the hood and put on the appropriate support rod. Remove the round rubber cover found behind the low beam lamp, then in the hood, by simply pulling it. Unhook the metal catch, extract the connector from its seat and the bulb will come out with it, as it is fixed right on the connector. Remove the exhausted bulb or that you intend to replace and insert the new one you purchased. Nothing easier! Return the duo connector-bulb back into place, making sure it is well positioned, replace the retainer and finally fit the rubber cover.


Posted on 7 January 2024 by ScegliAuto



Volkswagen Fox headlight bulb replacement
Volkswagen Fox (2003-2011 / MK 1) In this guide, let's see how to disassemble and replace the Volkswagen Fox headlight bulbs. First we open the bonnet and start by disassembling and r
Where are the fuses located in the Volkswagen Fox?
Volkswagen Fox (2015-2021 / MK 2) All the fuses of the Volkswagen Fox are located inside the appropriate fuse boxes that are installed in the car: in this vehicle model, it is possibl
Where is the fuse box of the Volkswagen Fox located?
Volkswagen Fox (2003-2011 / MK 1) To easily and safely find the fuse box of your Volkswagen Fox (year 2003-2011), simply follow these simple steps. First, go inside the cabin and make

    Frequently Asked Questions

    • Fox 2003-2011 - How much does it cost to replace the headlight bulb on a Volkswagen Fox? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos