Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the front headlight bulb of the Volkswagen Fox

Model: Volkswagen Fox MK 1 - Years 2003-2011
Part: Headlight bulb

We see the instructions useful for disassembling and replacing the headlight bulb of the Volkswagen Fox. First, we open the hood of the car and start removing the plastic protective cap; then we disconnect the electrical connector of the light by removing the bulb holder with the bulb, as shown in the video. At this point, we install the new low beam and high beam bulb (in this case having an H4 attachment type); insert it correctly and replace the other bulb in the same way, following the video tutorial until the end!

Posted on 2 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the headlight bulb of the Volkswagen Fox?
How do you replace the headlight bulb of the Volkswagen Fox?
Volkswagen Fox (2003-2011 / MK 1) To replace the headlight bulb of the Volkswagen Fox, you will need to open the hood to access the components inside the engine compartment. Here, you…
Replacing the Front Headlight Bulbs of the Volkswagen Fox
Replacing the Front Headlight Bulbs of the Volkswagen Fox
Volkswagen Fox (2003-2011 / MK 1) This guide shows how to remove and replace the front headlight bulbs of the Volkswagen Fox. First, open the bonnet and start by removing the plastic …
Replacement of the tail light and rear bulbs of the Volkswagen Fox
Replacement of the tail light and rear bulbs of the Volkswagen Fox
Volkswagen Fox (2003-2011 / MK 1) Following these brief instructions, we will see how to disassemble and replace the taillight and rear bulbs of the Volkswagen Fox. First, open the re…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos