Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Headlamp Bulbs on a Volkswagen Fox?

Model: Volkswagen Fox MK 1 - Years 2003-2011
Part: Tail light bulb

In this tutorial, see how to remove the rear headlamp and replace the bulbs on the Volkswagen Fox, a very simple and quick operation. First, ensure the key is not in the ignition, then open the boot and unscrew the plastic block located at the back of the headlamp. Once done, grasp it and pull it out from the bodywork, shaking it slightly to dislodge the internal clips. At this point, disconnect the connector and proceed with replacing the faulty bulb, which is accessible by first unlocking the rear cover.

Updated on 15 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the tail light and rear bulbs of the Volkswagen Fox
Replacement of the tail light and rear bulbs of the Volkswagen Fox
Volkswagen Fox (2003-2011 / MK 1) Following these brief instructions, we will see how to disassemble and replace the taillight and rear bulbs of the Volkswagen Fox. First, open the re…
Replacing the Front Headlight Bulbs of the Volkswagen Fox
Replacing the Front Headlight Bulbs of the Volkswagen Fox
Volkswagen Fox (2003-2011 / MK 1) This guide shows how to remove and replace the front headlight bulbs of the Volkswagen Fox. First, open the bonnet and start by removing the plastic …
How to replace the front headlight of the Volkswagen Fox
How to replace the front headlight of the Volkswagen Fox
Volkswagen Fox (2003-2011 / MK 1) Following these simple instructions, we will see how to disassemble and replace the front headlight of the Volkswagen Fox. First, open the hood of th…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos