Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Light and Bulbs on the Volkswagen Fox

Model: Volkswagen Fox MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Tail light

See other generations:
Video tutorial

Follow these brief instructions to remove and replace the rear light and bulbs on the Volkswagen Fox. First, open the boot and start by unscrewing the plastic screw of the light, located behind the light itself; then disconnect the electrical connector of the bulbs to remove it, as shown in the video.

At this point, separate the bulb holder from the light unit, replacing the faulty bulbs with new ones; if necessary, replace the entire rear light, applying the reverse procedure for refitting the light!


Updated on 5 October 2026 by ScegliAuto


Related tutorials

Replacing the Front Headlight Bulbs of the Volkswagen Fox
Replacing the Front Headlight Bulbs of the Volkswagen Fox
Volkswagen Fox (2003-2011 / MK 1) This guide shows how to remove and replace the front headlight bulbs of the Volkswagen Fox. First, open the bonnet and start by removing the plastic …
How to Replace the Rear Headlamp Bulbs on a Volkswagen Fox?
How to Replace the Rear Headlamp Bulbs on a Volkswagen Fox?
Volkswagen Fox (2003-2011 / MK 1) In this tutorial, see how to remove the rear headlamp and replace the bulbs on the Volkswagen Fox, a very simple and quick operation. First, ensure t…
How to replace the front headlight of the Volkswagen Fox
How to replace the front headlight of the Volkswagen Fox
Volkswagen Fox (2003-2011 / MK 1) Following these simple instructions, we will see how to disassemble and replace the front headlight of the Volkswagen Fox. First, open the hood of th…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos