Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Heater Resistor on a Golf 5

Model: Volkswagen Golf Golf 5, MK 5, Golf V - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Blower motor

See other generations:
This video is currently unavailable

Here’s how to remove the heater resistor on a Volkswagen Golf 5. Use a lever to remove the plastic cover under the glove compartment on the right, then unscrew the fastening screws (where the fan is located) with a screwdriver. Remove the protection underneath it. Disconnect the large electrical connector of the fan, then extract the resistor.

Insert a new fan resistor (connect the power connector). Finally, refit the cover and tighten the screws.

Test the air operation after reassembling all parts.


Updated on 4 April 2026 by ScegliAuto


Related tutorials

Removing the Fan Resistor on a Volkswagen Golf Mk4
Removing the Fan Resistor on a Volkswagen Golf Mk4
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) In this video tutorial, you will learn how to remove the fan resistor from the cabin of a Volkswagen Golf Mk4. First, get inside the car and remove t…
Removing the Cabin Fan Resistor on the Volkswagen Golf
Removing the Cabin Fan Resistor on the Volkswagen Golf
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) Today, we will learn how to remove and replace the cabin fan resistor on the Volkswagen Golf. First, get into the vehicle and begin by removing the p…
Dismantling and Replacing the Air Conditioning Resistor
Dismantling and Replacing the Air Conditioning Resistor
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) In case of issues with the air conditioning system, one potential fault could be the heating resistor. To replace this component, start by dismantlin…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos