Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Fan Resistor on a Volkswagen Golf Mk4

Model: Volkswagen Golf Golf IV, Golf 4, MK 4 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Blower motor

See other generations:
Video tutorial

In this video tutorial, you will learn how to remove the fan resistor from the cabin of a Volkswagen Golf Mk4. First, get inside the car and remove the lower part located under the glove compartment by taking out the plastic screws. Then, disconnect the electrical connector from the motor and use a 6 mm socket to unscrew the screws of the fan resistor.

At this point, remove it and replace it with a new one. Reassemble everything by screwing in the new resistor and refitting the previously removed cover.


Updated on 30 March 2026 by ScegliAuto


Related tutorials

Removing the Cabin Fan Resistor on the Volkswagen Golf
Removing the Cabin Fan Resistor on the Volkswagen Golf
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) Today, we will learn how to remove and replace the cabin fan resistor on the Volkswagen Golf. First, get into the vehicle and begin by removing the p…
Removing the Heater Resistor on a Golf 5
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Here’s how to remove the heater resistor on a Volkswagen Golf 5. Use a lever to remove the plastic cover under the glove compartment on the right, th…
How to Remove the Fan Resistor on Golf 5
How to Remove the Fan Resistor on Golf 5
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Remove the fan resistor from a Golf? Here’s how to take it out from inside the cabin. Use a lever to remove the plastics under the dashboard where th…

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos