Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : Replacing front bulbs on Volkswagen Polo

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo MK V, MK 5, Polo V, Polo 5, 6R - Years 2009-2017
Part: Headlight bulb
Operation: Replacing front bulbs on Volkswagen Polo

Open the hood and put on the special support rod. Unscrew the two T30 torx screws that fix the light in the upper and rear area of the same. Already done! This is enough to extract the light from its seat: pull it gently and without shaking it too much, so that it comes out of the two fixing clips always present inside the bonnet and therefore on the back of the light. Once extracted, remove the metal clips that secure the rear cover and change any bulb: to do this, disconnect the connector of the bulb concerned, lift the clip that secures the bulb and remove it.


Posted on 12 January 2024 by ScegliAuto

    Frequently Asked Questions

    • Polo 2001-2009 - How do you replace the parking light bulb in the Volkswagen Polo 9n? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos