Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Indicator Relay on Volkswagen Passat Mk1

Model: Volkswagen Passat 3BG, B5 - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Push button

See other generations:
This video is currently unavailable

This video shows how to remove and replace the indicator relay on a first series Volkswagen Passat; this procedure can be applied to most vehicles. First, get inside the car and remove the hazard light button; use something sharp (like a flat screwdriver) to lever it out, as shown in the video.

Next, pull out the relay; disconnect the electrical connector to remove it and replace it with the new one. Finally, apply the reverse procedure for reassembly!


Updated on 8 April 2026 by ScegliAuto


Related tutorials

Where are the Relays in a Volkswagen Passat?
Where are the Relays in a Volkswagen Passat?
Volkswagen Passat (1996-2005 / 3BG, B5) The relays in a Volkswagen Passat are located inside the designated relay boxes installed in the vehicle: in this car model, there are two relay boxe…
What is the Fuse and Relay Diagram in a Volkswagen Passat?
Volkswagen Passat (1988-1996 / B4, B3) In this video, you can see the fuse and relay diagram for the Volkswagen Passat B3 and B4, useful if you need to check one related to a malfunctionin…
Removing Fuel Pump Relay from Volkswagen Passat
Removing Fuel Pump Relay from Volkswagen Passat
Volkswagen Passat (1996-2005 / 3BG, B5) Today, locate the fuel pump relay and remove it from a second series Volkswagen Passat. First, open the bonnet: it is necessary to remove the fuel pu…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos