Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Radio on a Volkswagen Scirocco

Model: Volkswagen Scirocco MK 3 - Years 2008-2017
Part: Car stereo

Insert a plastic lever into the gap around the radio frame and gently pry it out, gradually removing it until the entire frame is detached. Now, unscrew the four side screws holding the radio (two on each side). That's it! This will allow you to extract the radio. Of course, at the back of the radio, there will be the electrical connector and the antenna cable, which you need to disconnect to completely remove the radio. Once done, reverse the process for installation: connect the cables, insert the radio back into place, and screw it in.

Updated on 9 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Remove the Radio from a Volkswagen Scirocco
How to Remove the Radio from a Volkswagen Scirocco
Volkswagen Scirocco (2008-2017 / MK 3) Although it may seem like a complex task to perform independently, removing the radio from a Volkswagen Scirocco is straightforward and accessible to…
Guide to Replacing the Timing Chain on a Volkswagen Scirocco 1.4 TSI
Guide to Replacing the Timing Chain on a Volkswagen Scirocco 1.4 TSI
Volkswagen Scirocco (2008-2017 / MK 3) Below we will discover the instructions on how to remove and replace the timing chain on a Volkswagen Scirocco 1.4 TSI. First, open the car's bonnet …
How to Remove the Clutch Master Cylinder on a Volkswagen Scirocco
How to Remove the Clutch Master Cylinder on a Volkswagen Scirocco
Volkswagen Scirocco (2008-2017 / MK 3) In today's tutorial, we will go through the steps to remove and replace the clutch master cylinder on a Volkswagen Scirocco, as well as on the Golf 6…

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos