Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Washer Nozzles on a Volkswagen Vehicle

Model: Volkswagen Volkswagen Various
Part: Windshield wipers

To access the washer nozzles on your Volkswagen vehicle, first lift the bonnet, as they are located at the top, near the windscreen. Removing the nozzles from their seat is very simple; just grip them from the sides and pull them out with your fingers. Once done for both nozzles, cover the engine with a cloth, then proceed to disconnect them from the washer fluid ducts. To do this, move the metal tab and pull the nozzle. Reverse the process for reassembly.

Updated on 15 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Calibrate the Injectors of a Volkswagen 1.6 TDi Engine?
How to Calibrate the Injectors of a Volkswagen 1.6 TDi Engine?
Volkswagen Volkswagen Various To calibrate the injectors of a Volkswagen 1.6 TDi engine, you need to use a scanner with the VCDS programme. This scanner must be connected to the O…
A Problem Affecting VAG 1.6 Diesel 105 HP Engines
A Problem Affecting VAG 1.6 Diesel 105 HP Engines
Volkswagen Volkswagen Various This 1.6 TDI 105 HP engine is generally appreciated for its good performance and responsiveness, quietness, and low fuel consumption. However, it has…
How to change the water pump on a Volkswagen car
How to change the water pump on a Volkswagen car
Volkswagen Volkswagen Various In this video, we can see how to change the water pump on a Volkswagen car with a 1.9 TDI engine, installed on Passat, Golf, Corrado; Audi, Seat Cord…

Other guides you may be interested in

Where is the Spare Wheel in the Peugeot 5008?

This video shows where the spare wheel is located in the Peugeot 5008 and how to access it, useful in case of a puncture. As shown, the wheel is not in the usual boot compartment but underneath it, outside the vehicle. To free the wheel, first gather the tools provided, then open the boot, locate the small indicated hatch, and open it. Next, loosen the bolt just released using the large socket wrench enough to lower the wheel to the ground.

Watch the video!


by ScegliAuto

More videos