Do it yourself
Frequently asked questions about cars and motorcycles

Replacing Front Door Lock on Volkswagen Golf

Model: Volkswagen Golf MK 6, Golf VI, Golf 6, 5K1 - Years 2008-2012
Part: Door lock

In this video tutorial, you will learn how to remove and replace the front door lock on a sixth-generation Volkswagen Golf. First, open the front door and remove the door panel by unscrewing all the fixing screws found on the sides and under the handle; once removed, disconnect the electrical connector and the handle cable. At this point, remove the rectangular cover of the outer handle and take off the side cap: then unscrew the fixing screw to extract the door lock, as shown in the video!

Updated on 16 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) Today, we will see in this video tutorial how to remove the front door lock on a fifth-generation Volkswagen Golf. First, open the front door and uns…
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) In this video tutorial, you will see the essential steps to remove the front door lock of a fifth-generation Volkswagen Golf, following the instructi…
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) In this video, we will see how to replace the lock cylinder on the door of a Volkswagen Golf Mk4. First, open the car door and, after removing the si…

Other guides you may be interested in

    Frequently Asked Questions

    • Golf 2003-2008 - What to do if the door on Golf 5 does not open? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos