Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Dashboard Panels on Volkswagen New Beetle MK2

Model: Volkswagen New Beetle 9C, MK 2 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Dashboard

See other generations:
Video tutorial

In this video, see how to remove the dashboard panels on a Volkswagen New Beetle MK2, following these simple and quick steps. First, get inside the vehicle and start by removing the central plastic cover of the dashboard by pulling it forward, as shown in the video; then unscrew the securing screws located underneath using a T20 Torx screwdriver.

At this point, you can remove the two dashboard panels where the speakers are located; the disassembly and replacement of these will be illustrated next. Apply the reverse procedure for reassembly!


Updated on 17 April 2026 by ScegliAuto


Related tutorials

How to Remove the Dashboard on a Volkswagen New Beetle?
How to Remove the Dashboard on a Volkswagen New Beetle?
Volkswagen New Beetle (1999-2012 / 9C, MK 2) To remove the dashboard on a Volkswagen New Beetle, use a tool like a screwdriver to pry off the trim panel located at the top centre of the dashboar…
How to Remove the Roof Panel of a Beetle/New Beetle
Volkswagen New Beetle (1999-2012 / 9C, MK 2) How do you remove the roof lining of a Volkswagen New Beetle? This video shows you how to proceed. Start by removing the side handles of the headlini…
Where to Find the Cabin Fuse Box of the Volkswagen Beetle
Where to Find the Cabin Fuse Box of the Volkswagen Beetle
Volkswagen New Beetle (1999-2012 / 9C, MK 2) If you own a first-generation Volkswagen Beetle and need to locate the cabin fuse box, simply follow this guide and apply the described procedure. Fi…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos