Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Centre Console of the Volkswagen New Beetle

Model: Volkswagen New Beetle 9C, MK 2 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Dashboard

See other generations:
Video tutorial

How to remove the centre console of the Volkswagen New Beetle? Follow these steps carefully: using a plastic or metal lever, pry off the upper plastic trim of the dashboard. Next, unscrew the screws at the top of the console using a screwdriver or socket.

Remove the plastic frame around the stereo, pull the stereo out of the dashboard, and unscrew the securing pins located at the bottom of the climate control buttons with a socket. Remove the switch panel and disconnect the power connectors.

Finally, unscrew the last pins around the console and pull the entire piece away from the dashboard.


Updated on 1 March 2026 by ScegliAuto


Related tutorials

Guide to Removing the Centre Console of the Volkswagen New Beetle
Guide to Removing the Centre Console of the Volkswagen New Beetle
Volkswagen New Beetle (2011-2018 / MK 3) Today's instructions will show you how to remove and replace the centre console and armrest of the Volkswagen New Beetle. First, get inside the cabin…
How to Remove the Steering Wheel on a Volkswagen New Beetle
How to Remove the Steering Wheel on a Volkswagen New Beetle
Volkswagen New Beetle (1999-2012 / 9C, MK 2) Below are the instructions that will allow you to remove and replace the steering wheel on a Volkswagen New Beetle in simple steps. First, get inside…
How to Replace the Heating Radiator in the Volkswagen New Beetle?
How to Replace the Heating Radiator in the Volkswagen New Beetle?
Volkswagen New Beetle (1999-2012 / 9C, MK 2) To replace the cabin heating radiator in the Volkswagen New Beetle, you must completely dismantle the dashboard to access the components underneath. …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos