Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the door speakers of the Volkswagen New Beetle

Model: Volkswagen New Beetle 9C, MK 2 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Speaker

See other generations:
Video tutorial

These short and simple instructions will show us how to disassemble and replace the front door speakers of the Volkswagen New Beetle. First, we open the front door of the car and start disassembling and removing the door panel by unscrewing all the fixing screws; then we unscrew the speaker screws, disconnecting the power connector to remove it, as shown in the video.

At this point, we replace the speaker with the new one, having the same power; let's check its operation before reassembling the door trim!


Posted on 30 August 2025 by ScegliAuto


Related tutorials

How to remove the door panel of the Volkswagen New Beetle?
How to remove the door panel of the Volkswagen New Beetle?
Volkswagen New Beetle (1999-2012 / 9C, MK 2) To remove the door panel of the Volkswagen New Beetle, use a tool to pry off the trim of the armrest located in the centre of the door. Once this is …
Removing Speaker on New Beetle
Removing Speaker on New Beetle
Volkswagen New Beetle (1999-2012 / 9C, MK 2) Use a lever to pry the handle on the door panel, then detach the piece (as shown in the video) and use a screwdriver to undo the screws securing the …
How to Remove the Door Panel of the Volkswagen New Beetle?
How to Remove the Door Panel of the Volkswagen New Beetle?
Volkswagen New Beetle (1999-2012 / 9C, MK 2) To remove the door panel of the Volkswagen New Beetle, use a tool to pry off the internal trim of the armrest completely. Once removed, proceed to lo…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos