Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Speaker on New Beetle

Model: Volkswagen New Beetle 9C, MK 2 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Door trim panel

See other generations:
Video tutorial

Use a lever to pry the handle on the door panel, then detach the piece (as shown in the video) and use a screwdriver to undo the screws securing the door. Using a plastic lever, detach all the clips around the perimeter of the door.

Pull the panel away with your hands, (disconnect the opening lever cable, the window lift connectors, and the speakers). Undo the screws of the speaker and remove it from the door.

Fit the new speaker and tighten the mounting screws. Refit the door panel with the handle cable and power connectors.


Updated on 17 March 2026 by ScegliAuto


Related tutorials

Disassembly of the rear side panel of the Volkswagen New Beetle
Disassembly of the rear side panel of the Volkswagen New Beetle
Volkswagen New Beetle (1999-2012 / 9C, MK 2) Today we will see the instructions that will allow us to disassemble the inner side plastic panel of the Volkswagen New Beetle, in order to access th…
How to replace the door speakers of the Volkswagen New Beetle
How to replace the door speakers of the Volkswagen New Beetle
Volkswagen New Beetle (1999-2012 / 9C, MK 2) These short and simple instructions will show us how to disassemble and replace the front door speakers of the Volkswagen New Beetle. First, we open …
Removing the Bulb from a Volkswagen New Beetle
Removing the Bulb from a Volkswagen New Beetle
Volkswagen New Beetle (1999-2012 / 9C, MK 2) In this video, you will see how to remove the front headlight bulb from the Volkswagen New Beetle up to the year 2011. First, open the bonnet of your…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos