Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Warning Light on a Volkswagen Caddy?

Model: Volkswagen Caddy 2K, MK 3 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Tire pressure warning light

See other generations:
Video tutorial

To reset the tyre warning light on the Volkswagen Caddy, first turn on the ignition and press and hold the clip button located underneath on the right lever for a few seconds. A menu will appear on the display: select "Settings" by pressing the button below the lever to confirm.

Next, select "Tyre Pressure" and to reset the light, choose "Confirm". At this point, the light will be successfully reset. It is important to check the tyre pressure beforehand, following the instructions found on the inside of the door.


Updated on 20 April 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Light on a Volkswagen Caddy
How to Reset the Tyre Pressure Light on a Volkswagen Caddy
Volkswagen Caddy (2020-2026 / SB) You can clear the tyre pressure light displayed on the instrument cluster of the Volkswagen Caddy by first inflating the tyres until they reach the r…
How to Reset the Tyre Pressure Light on a Volkswagen Caddy Van?
How to Reset the Tyre Pressure Light on a Volkswagen Caddy Van?
Volkswagen Caddy (2020-2026 / SB) In this tutorial, you will see how to reset the tyre pressure light on a Volkswagen Caddy van, a very simple and quick operation. Before doing this, …
How to Reset the Tyre Pressure Light on a Volkswagen Caddy?
How to Reset the Tyre Pressure Light on a Volkswagen Caddy?
Volkswagen Caddy (2003-2020 / 2K, MK 3) To reset the tyre pressure light on a Volkswagen Caddy, first inflate the tyres to the recommended pressure value: this value is indicated on the sti…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos