Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Windscreen Washer Reservoir from the Volkswagen Golf GTI?

Model: Volkswagen Golf Golf 6, MK 6, 5K1, Golf VI - Years: 2008, 2009, 2010, 2011, 2012
Part: Checks and maintenance

See other generations:
Video tutorial

To replace the windscreen washer reservoir on the Volkswagen Golf GTI, you must remove the bumper by loosening all the bolts located at the top and inside the wheel arch. Next, loosen the bolts securing the right front headlight, disconnect its connectors, and remove it from its housing.

At this point, the washer fluid reservoir will be accessible and should be gently pulled out, disconnecting all connectors and hoses. Finally, you can replace it by inserting a new reservoir that should be properly connected.


Updated on 22 April 2026 by ScegliAuto


Related tutorials

Replacing the Radiator Coolant Reservoir on the Volkswagen Golf 4 GTI
Replacing the Radiator Coolant Reservoir on the Volkswagen Golf 4 GTI
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) In today's tutorial, you will learn how to replace the coolant reservoir on the fourth generation Volkswagen Golf GTI. First, open the bonnet and sta…
How to Replace the GTI Badge on the Bodywork of the Volkswagen Golf
How to Replace the GTI Badge on the Bodywork of the Volkswagen Golf
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) In this guide, we will see the instructions that will allow us to replace the GTI badge on the bodywork of the Volkswagen Golf. To remove the GTI bad…
How to Remove the Rear Seats from a Volkswagen Golf GTI
How to Remove the Rear Seats from a Volkswagen Golf GTI
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) This guide briefly explains how to remove and replace the rear seats from a Volkswagen Golf GTI, following these simple steps. First, open the rear d…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos