Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Seats from a Volkswagen Golf GTI

Model: Volkswagen Golf Golf IV, Golf 4, MK 4 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Seat

See other generations:
Video tutorial

This guide briefly explains how to remove and replace the rear seats from a Volkswagen Golf GTI, following these simple steps. First, open the rear doors and start lifting the seat cushions to detach and remove them; then open the tailgate to unscrew the bolts of the seat backs, which are located at the base of the seats, as shown in the video.

At this point, remove and, if necessary, replace the seats with new ones; then reassemble everything by applying the reverse procedure!


Updated on 21 June 2026 by ScegliAuto


Related tutorials

How to Replace the GTI Badge on the Bodywork of the Volkswagen Golf
How to Replace the GTI Badge on the Bodywork of the Volkswagen Golf
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) In this guide, we will see the instructions that will allow us to replace the GTI badge on the bodywork of the Volkswagen Golf. To remove the GTI bad…
Folding Rear Seats on Volkswagen Golf 4
Folding Rear Seats on Volkswagen Golf 4
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Fold the rear seats of the Volkswagen Golf 4 to create space in the cabin. Lift the rear seat bases to allow the backrests to rest. Lower the headres…
Removing the Fuel Tank on Volkswagen Golf GTI MK3
Removing the Fuel Tank on Volkswagen Golf GTI MK3
Volkswagen Golf (1991-1997 / MK 3, Golf III, Golf 3) In today's video, we will see step-by-step instructions for removing the fuel tank on a Volkswagen Golf GTI MK3. First, disconnect the two battery ca…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos