Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Wiper from a Volkswagen Golf

Model: Volkswagen Golf MK 5, Golf 5, Golf V - Years 2003-2008
Part: Windshield wipers

Start by removing the protective cap from the rear wiper housing, which can be done easily by hand. This will expose the bolt securing the wiper. You will need to unscrew and remove this bolt. Once the bolt is removed, it is advisable to apply a lubricant, such as WD-40, to facilitate the removal of the wiper. At this point, you can remove it. If it is stuck, you can use a puller, but first, you must remove the water jet head. This way, you will have successfully removed the rear wiper from the vehicle.

Updated on 23 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Wiper Motor on the Volkswagen Golf 4
How to Remove the Rear Wiper Motor on the Volkswagen Golf 4
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) Watch this short video for the main instructions on how to remove and replace the rear wiper motor on the fourth series Volkswagen Golf. First, remov…
How to Replace the Rear Wiper on the Volkswagen Golf
How to Replace the Rear Wiper on the Volkswagen Golf
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) Today, follow these step-by-step instructions to remove and replace the rear wiper or tailgate wiper on the Volkswagen Golf. First, move to the rear …
Removing the Rear Wiper Arm on Volkswagen Golf 5
Removing the Rear Wiper Arm on Volkswagen Golf 5
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) In this video tutorial, you will learn how to remove the wiper arm along with the rear wiper on a fifth generation Volkswagen Golf by following these…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos