Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Glove Box of a Volkswagen Golf 6

Model: Volkswagen Golf Golf 6, MK 6, 5K1, Golf VI - Years: 2008, 2009, 2010, 2011, 2012
Part: Glove compartment

See other generations:
Video tutorial

In this video tutorial, you will see how to remove the glove box of a sixth-generation Volkswagen Golf, following the simple steps outlined below. First, access the passenger side and open the glove box, unscrewing all the Torx screws found on the sides; then disconnect the electrical connector for the bulbs and gently start to pull out the glove box, as illustrated in the video.

To proceed with reassembly, simply apply the reverse procedure; follow the video to the end!


Updated on 24 April 2026 by ScegliAuto


Related tutorials

How to Remove the Glove Box from a Volkswagen Golf?
How to Remove the Glove Box from a Volkswagen Golf?
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) To remove the glove box from the front passenger side of the Volkswagen Golf, open the glove box and unscrew the screws that secure it from the top. …
How to Remove the Glove Box in the Volkswagen Golf?
How to Remove the Glove Box in the Volkswagen Golf?
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) If you need to remove the glove box in the Volkswagen Golf 7, for instance, to replace the cabin filter, follow this tutorial. First, open the glove …
Removing the Glove Box of a Volkswagen Golf 6
Removing the Glove Box of a Volkswagen Golf 6
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) Today, you will see in this tutorial how to remove the glove box of a sixth-generation Volkswagen Golf. First, get inside the car and use a lever to …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos