Do it yourself
Frequently asked questions about cars and motorcycles
Video tutorial

How do you replace a car key lock? First, open the vehicle's door where the lock to be replaced is located. Remove the rubber sleeve from the door and detach the plastic cover protecting the holes where the fastening screws are anchored.

Unscrew the fastening screw corresponding to the lock to be replaced and from the outside, lever with a screwdriver or plastic support to extract the tumbler; do the same with the handle. Unscrew the anchoring supports of the outer door panel and slide it off, exposing the entire lock mechanism.

Remove the entire block to be replaced and position the new lock, disconnecting and reconnecting the appropriate wiring for the central locking. Now reposition the outer door panel, the handle, the tumbler, and all the fastening screws, proceeding in reverse order to the disassembly steps.


Updated on 25 April 2026 by ScegliAuto


Related tutorials

Volkswagen Golf (2003-2008 / Golf 5, Golf V, MK 5) Let's see how to fix the ignition of the Volkswagen Golf MK5, which is stuck in the "on" position with the steering lock inside the barrel. A quick s…
Volkswagen Golf (1991-1997 / Golf III, MK 3, Golf 3) For this operation, you simply need two screwdrivers, one flat-head and one cross-head, along with the lock key. Remove the panel from the tailgate t…
Volkswagen Golf (2012-2019 / Golf 7, Golf VII, MK 7) It will be possible to adjust the clock of the Volkswagen Golf by inserting the ignition key into the ignition switch, in order to turn on the instru…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos