|
Do it yourself
| |||
| ||||
How to repair the locked ignition of the Volkswagen Golf MK5
Model: Volkswagen Golf
Golf 5, MK 5, Golf V
- Years:
2003, 2004, 2005, 2006, 2007, 2008
Video tutorial
Let's see how to fix the ignition of the Volkswagen Golf MK5, which is stuck in the "on" position with the steering lock inside the barrel. A quick solution, without replacing the barrel, is to remove the fuel pump relay (which is the 458 in the engine compartment or the 449 under the steering wheel). Of course, before doing this operation, it is necessary to disconnect the battery! Under the steering wheel there are 3 screws (2 above and 1 below); we release the green clips of the cover, and with a 1.5 mm hex key, unlock the barrel (insert it into the side hole when the key is in the "on" position: remove the clips and the barrel. Now we remove the fragments of the steering lock: lower the steering control module without removing the steering wheel, drill a hole in the aluminum barrel with a drill and remove the broken pieces, using a metal wire. Now we reassemble everything. The steering lock will no longer work but the car will start normally.
Posted on 4 August 2025 by ScegliAuto
Related tutorials
Volkswagen Golf
(2003-2008 /
Golf 5, MK 5, Golf V)
In today's tutorial video, you will see how to remove, repair, or replace the boot lock on a fifth-generation Volkswagen Golf in simple steps. First,…
Volkswagen Golf
(2003-2008 /
Golf 5, MK 5, Golf V)
Today, we will see the main instructions on how to dismantle and replace the ignition barrel on the Volkswagen Golf. First, open the bonnet of the ve…
Volkswagen Golf
(2008-2012 /
Golf 6, MK 6, 5K1, Golf VI)
Learn how to diagnose and repair the air conditioning on a Volkswagen Golf VI: unfortunately, air conditioning problems are quite common on this mode…
Other guides you may be interested in
|
How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?
Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.272
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |