Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Remote Battery in a Volkswagen Golf 7?

Model: Volkswagen Golf Golf 7, Golf VII, MK 7 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Key

See other generations:
Video tutorial

After a few years of use, the battery in the remote for the Volkswagen Golf 7 will run out and will need replacing. This is a very easy and quick operation, as shown in the attached tutorial.

To replace the battery, you will need a small flat-head screwdriver and, of course, a replacement battery, model CR2025 or DL2025. Start by extending the emergency key and insert the screwdriver into the gap created, as shown in the video. Leverage it to lift the small rear cover until it opens.

At this point, remove and insert the battery, ensuring the correct polarity.


Updated on 27 April 2026 by ScegliAuto


Related tutorials

Volkswagen Golf (2012-2019 / Golf 7, Golf VII, MK 7) To replace the remote battery on a Volkswagen Golf 7, press the button located on the front of the remote to lift the key and free its housing. Once …
Volkswagen Golf (2003-2008 / Golf 5, Golf V, MK 5) To replace the battery in the key fob of a Volkswagen Golf, lift the emergency key by pressing the button located at the top of the fob. Once the key…
Volkswagen Golf (2012-2019 / Golf 7, Golf VII, MK 7) These brief and simple steps will illustrate the procedure for disassembling and replacing the battery of the remote key for the Volkswagen Golf. Fir…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos