Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Brake Fluid in a Volkswagen Golf 7

Model: Volkswagen Golf Golf VII, MK 7, Golf 7 - Years 2012-2019

In this video tutorial, you will see how to bleed the brake fluid to replace it with new fluid in a seventh-generation Volkswagen Golf. First, lift the front of the vehicle and remove the wheel by unscrewing the bolts. Now, remove the bleed screws located on the brake caliper, as shown in the video. Next, open the cap of the brake fluid reservoir and connect your pump, which will expel the brake fluid through the connecting hoses by opening the screw with a spanner. Finally, pour in the new fluid!

Updated on 1 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Top Up the Brake Fluid on the Volkswagen Golf TSI
How to Top Up the Brake Fluid on the Volkswagen Golf TSI
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) In this short and simple guide, you will learn how and where to top up the brake fluid of the Volkswagen Golf with a TSI engine. First, obtain the ne…
How to Reset the Brake Warning Light on the Volkswagen Golf
How to Reset the Brake Warning Light on the Volkswagen Golf
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) Today, you will learn the main cause of brake system failure, which triggers the brake warning light on the Volkswagen Golf. The brake light illumina…
Replacing the Brake Master Cylinder
Replacing the Brake Master Cylinder
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) If pressing the brake pedal causes it to sink rather than provide the correct resistance, there is a problem with the master cylinder. To replace it,…

Other guides you may be interested in

    Frequently Asked Questions

    • Golf 1997-2003 - How many liters of fuel reserve does the Volkswagen Golf have? Read answer
    • Golf 2019-2026 - What problems does the Volkswagen Golf 8 infotaintment system have? Read answer

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos