Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Brake Master Cylinder

Model: Volkswagen Golf Golf IV, Golf 4, MK 4 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Pump

See other generations:
Video tutorial

If pressing the brake pedal causes it to sink rather than provide the correct resistance, there is a problem with the master cylinder. To replace it, first create some working space by removing the coolant reservoir, the distribution cover, and the hoses that interfere with the brake fluid reservoir.

Then, siphon the fluid from the reservoir before disconnecting the pipes and unscrewing the fixing pins of the master cylinder. Proceed in reverse for the installation of the new one, ensuring to apply the O-ring gasket and bleed the system after installation.


Updated on 16 February 2026 by ScegliAuto


Related tutorials

How to Replace the Clutch Master Cylinder on a Volkswagen Golf Plus
How to Replace the Clutch Master Cylinder on a Volkswagen Golf Plus
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) In this video tutorial, you will learn how to remove and replace the clutch master cylinder on a Volkswagen Golf Plus, following the instructions bel…
Guide to Replacing the Brake Booster on the Volkswagen Golf
Guide to Replacing the Brake Booster on the Volkswagen Golf
Volkswagen Golf (1983-1992 / Golf 2, MK 2) This guide outlines the main steps to remove and replace the master cylinder and brake booster on the Volkswagen Golf. First, open the bonnet of your…
How to Replace the Brake Cylinder on a Volkswagen Golf
Volkswagen Golf (1983-1992 / Golf 2, MK 2) To replace the brake cylinder on a Volkswagen Golf, open the bonnet to access the components in the engine compartment: the cylinder is located at th…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos