Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Brake Booster on the Volkswagen Golf

Model: Volkswagen Golf Golf 2, MK 2 - Years: 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992

See other generations:
Video tutorial

This guide outlines the main steps to remove and replace the master cylinder and brake booster on the Volkswagen Golf. First, open the bonnet of your car and locate the hydraulic brake booster; then disconnect the fluid line and unscrew the fastening bolts to remove it, as shown in the video.

At this point, carry out the overhaul or directly replace the brake booster by installing the original replacement part; then reassemble everything, following the video tutorial to the end!


Updated on 7 August 2026 by ScegliAuto


Related tutorials

Guide to replacing the timing belt of the Volkswagen Golf 1.4 TSI
Guide to replacing the timing belt of the Volkswagen Golf 1.4 TSI
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) In this guide, we will see the main instructions on how to disassemble and replace the timing belt on the Volkswagen Golf 1.4 TSI. First of all, we o…
Guide to Replacing the Water Pump and Timing Belt on the Volkswagen Golf 1.8T
Guide to Replacing the Water Pump and Timing Belt on the Volkswagen Golf 1.8T
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Today's guide will show you the main steps on how to remove and replace the water pump and timing belt on the Volkswagen Golf 1.8T. For simplicity an…
Guide to Replacing the Windscreen of the Volkswagen Golf
Guide to Replacing the Windscreen of the Volkswagen Golf
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) This guide will show you the procedure for removing and replacing the windscreen of the Volkswagen Golf. First, move to the outside and gently remove…

    Frequently Asked Questions

    • Golf 2008-2012 - How do you use the emergency boot release on a Volkswagen Golf 6? Read answer

Where to Find and How to Remove the Spare Wheel of a Peugeot 5008?

The spare wheel of a Peugeot 5008 is located under the rear of the vehicle. To remove it, you need to lift the third row of seats to access the fixing bolt that holds the spare wheel in position. Using the correct spanner, proceed to unscrew the fixing bolt until the wheel is no longer secured. At this point, you can extract the spare wheel from underneath the vehicle. Once you have completed this step, you are free to fit the spare wheel. Ensure you correctly remount the spare wheel and securely tighten the fixing bolt when you are finished.

Watch the video!


by ScegliAuto

More videos