|
Do it yourself
| |||
| ||||
Remove the remote control of a VW Golf 6
Model: Volkswagen Golf
Golf 5, Golf V, MK 5
- Years:
2003, 2004, 2005, 2006, 2007, 2008
Video tutorial
Do you want to remove the remote control of the Golf 6? Remove the plastic covers to access the flat battery. Replace the battery with a new one after removing the old one. Press the release button of the metal key, use a screwdriver to pry between the two covers of the key (in the space where the metal key fits). Pry until the cover opens, then extract the worn battery with a small screwdriver, take a new one of the same size and voltage. Refit the small circuit board onto the same cover or replace it with a new one, press on the key case until you hear the locking click.
Updated on 1 May 2026 by ScegliAuto
Related tutorials
Volkswagen Golf
(1997-2003 /
MK 4, Golf 4, Golf IV)
How do you dismantle the key fob of the Golf 4? Here’s how to open the key fob and change the damaged battery. Take your key fob and press the releas…
Volkswagen Golf
(2012-2019 /
Golf 7, Golf VII, MK 7)
In this guide, you will learn how to disassemble and replace the battery of the key fob for a Volkswagen Golf Mk7, following the simple steps outline…
Volkswagen Golf
(2012-2019 /
Golf 7, Golf VII, MK 7)
How do you change the battery in the key fob of your Volkswagen Golf? In this detailed video, see how to do it. Take your key fob and press the relea…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
Resetting the Service Light on the Mitsubishi Canter
When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.100
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |