Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Sun Visor from Volkswagen Tiguan

Model: Volkswagen Tiguan BW, MK 2, AD - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025

See other generations:
Video tutorial

In this video tutorial, you will learn how to remove the sun visor from a second-generation Volkswagen Tiguan in simple steps. This procedure can be applied to most vehicles as they use a similar system.

First, get inside the car and lower the visor to unclip it from one side. Then, using a very thin lever, remove the plastic cover to access the sun visor and disconnect its sensor.

If desired, perform the same operation for the other visor; apply the reverse procedure for reassembly!


Updated on 1 May 2026 by ScegliAuto


Related tutorials

How to Adjust the Opening and Closing of the Panoramic Roof in the Volkswagen Tiguan
How to Adjust the Opening and Closing of the Panoramic Roof in the Volkswagen Tiguan
Volkswagen Tiguan (2024-2026 / MK 3) Today, I will explain how to adjust the opening and closing of the panoramic sunroof in the Volkswagen Tiguan. To perform this operation, we need to …
How to Replace the Fog Light Bulb on Tiguan
How to Replace the Fog Light Bulb on Tiguan
Volkswagen Tiguan (2007-2016 / 5N, MK 1) Do you want to replace the fog light bulb? Remove the components under the wheel arch liner to access the fog light on the Tiguan. Use a suitable scr…
Repairing the Shark Fin Antenna on the Volkswagen Tiguan
Repairing the Shark Fin Antenna on the Volkswagen Tiguan
Volkswagen Tiguan (2016-2025 / BW, MK 2, AD) If you accidentally removed the roof antenna (also known as the 'shark fin') from your Volkswagen Tiguan while in a garage, this video is for you. Fi…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos