Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear seats from a Volkswagen Golf 7?

Model: Volkswagen Golf MK 7, Golf 7, Golf VII - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Seat

See other generations:
Video tutorial

To remove the rear seats from a Volkswagen Golf 7, first, pull out the pins located between the backrest and the cushion of each rear seat. At this point, lift the front part of the cushion and pull it forward to completely remove it. Now, lower the backrests using the levers near the headrests and unscrew the bolts at the base of the backrests.

Before you can extract them from the cabin, also unscrew the bolts securing the seatbelts.


Updated on 1 May 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Seats on the Volkswagen Golf?
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) To replace the rear seats on the Volkswagen Golf, open the tailgate to access the boot: here you will find the screws that secure the rear seat backs…
How to Remove the Rear Seats from a Volkswagen Golf
How to Remove the Rear Seats from a Volkswagen Golf
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Let’s see how to remove the rear seats from a Volkswagen Golf Mk5. First, remove the metal guides located at both ends of the backrest (mounted on th…
How to remove the rear seats from the Volkswagen Golf?
How to remove the rear seats from the Volkswagen Golf?
Volkswagen Golf (1991-1997 / MK 3, Golf III, Golf 3) To remove the rear seats from the Volkswagen Golf, loosen the bolts located at the front, just under the cushions. Once these bolts are loosened, lif…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos