Do it yourself
| ||||
|
Volkswagen Golf - Video tutorial
Model: Volkswagen Golf
MK 7, Golf 7, Golf VII
- Years 2012-2019 To be able to replace the injectors of the Volkswagen Golf 2.0 TDI, you need to open the hood to access the engine compartment and remove the side cover of the engine, under which the timing belt is located. At this point, it is possible to unscrew the bolts that secure the cover of the upper part of the engine; the latter will need to be removed so that the lower components can be accessed. The injectors must then be disconnected from their connectors and extracted from their housings. After removal, you will be able to insert the new injectors and install the removed covers.
Posted on 23 March 2024 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.036
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |