Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Volkswagen Polo

Model: Volkswagen Polo Polo VI, Polo 6, MK 6, AW1, MK VI - Years 2017-2025
Part: Service warning light

To reset the maintenance light on a Volkswagen Polo quickly and easily, carefully read the following guide and follow the various instructions provided. First, locate the button next to "0.0/Set" in the centre of the instrument panel and hold it down. At the same time, insert the key and turn on the ignition without starting the engine. Once you are prompted to confirm the reset, release the button and press it once more immediately after. At this point, the reset is complete and you can turn off the ignition.

Updated on 8 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the "Service" Light on a Volkswagen Polo
How to Reset the "Service" Light on a Volkswagen Polo
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) Before you can start, sit in the driver's seat of your Volkswagen Polo and close all the doors. Begin by pressing and holding the "0.0/SET" button lo…
How to Reset the Service Light on a Volkswagen Polo?
How to Reset the Service Light on a Volkswagen Polo?
Volkswagen Polo (1994-2003 / MK III, Polo III, Polo 3, MK 3, 6N) To reset the Service light on a Volkswagen Polo, press and hold the button located on the right side of the instrument panel, just below the speedome…
How to Reset the Inspection Light on a Volkswagen Polo
How to Reset the Inspection Light on a Volkswagen Polo
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) Follow the procedure to reset the oil change service light on your Volkswagen Polo. First, get into the vehicle and press and hold the button located…

Other guides you may be interested in

    Frequently Asked Questions

    • Polo 2009-2017 - What to do when the oil light comes on on Volkswagen Polo? Read answer

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos