Do it yourself
Frequently asked questions about cars and motorcycles

How to Adjust the Points on a Volkswagen Beetle?

Model: Volkswagen Maggiolino MK 1 - Years 1938-1980
Part: Checks and maintenance

To adjust the points on a Volkswagen Beetle, first remove the distributor so that it can be extracted from its housing. Once the distributor is removed, loosen the fastening bolts that secure the upper part, remove it, and access the underlying components. Here you will find the vacuum advance unit, which, once removed, will allow access to the contact points: these should be set with a gap of 0.4 mm between the two electrodes. After adjustment, reassemble and refit the distributor.

Updated on 16 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Maggiolino (1938-1980 / MK 1) To adjust the valves on a Volkswagen Beetle, lift the car so that the wheels are off the ground and loosen the bolts securing the right rear wheel. O…
Volkswagen Maggiolino (1998-2005 / ) Before starting, open the front door of your Volkswagen Beetle. Begin by removing the door panel, disengaging the relevant clips and unscrewing the f…
…

Where is the Spare Wheel in the Peugeot 5008?

This video shows where the spare wheel is located in the Peugeot 5008 and how to access it, useful in case of a puncture. As shown, the wheel is not in the usual boot compartment but underneath it, outside the vehicle. To free the wheel, first gather the tools provided, then open the boot, locate the small indicated hatch, and open it. Next, loosen the bolt just released using the large socket wrench enough to lower the wheel to the ground.

Watch the video!


by ScegliAuto

More videos