Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Adjust the Valves on a Volkswagen Beetle?

Model: Volkswagen Maggiolino MK 1 - Years 1938-1980
Part: Valve

To adjust the valves on a Volkswagen Beetle, lift the car so that the wheels are off the ground and loosen the bolts securing the right rear wheel. Once the wheel is removed, detach the cover located at the rear. Underneath, you will find the valves, which can be tightened or loosened using the appropriate socket wrench. After adjusting the valves as recommended, seal them with the cover and reinstall the previously removed wheel.

Updated on 2 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Valve Timing Adjustment for Volkswagen Beetle 1200
Valve Timing Adjustment for Volkswagen Beetle 1200
Volkswagen Maggiolino (1938-1980 / MK 1) In this video tutorial, learn how to adjust the valve timing of a Volkswagen Beetle 1200. This operation should be performed every 10,000 miles. Firs…
How to Adjust the Points on a Volkswagen Beetle?
How to Adjust the Points on a Volkswagen Beetle?
Volkswagen Maggiolino (1938-1980 / MK 1) To adjust the points on a Volkswagen Beetle, first remove the distributor so that it can be extracted from its housing. Once the distributor is remov…
How to change the date and time on the Volkswagen Beetle MK2
How to change the date and time on the Volkswagen Beetle MK2
Volkswagen Maggiolino (2011-2019 / MK 2) Let's see how to change the date and time on the Volkswagen Beetle MK2: this is a very simple procedure that is carried out using two buttons integra…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos