Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : How to disassemble the water pump of the Volkswagen Polo TDI

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo V, MK V, 6R, Polo 5, MK 5 - Years 2009-2017
Part: Pump
Operation: How to disassemble the water pump of the Volkswagen Polo TDI

In this video tutorial we will see the main steps that will allow us to disassemble and replace the water pump and timing belt of the Volkswagen Polo TDI. First of all, we lift the car and begin to remove the right front wheel, also removing the wheel arch; after which we unscrew the screws of the crankshaft pulley, disconnecting the service belt, as shown in the video. At this point we remove the timing cover to replace the belt; we disconnect the coolant sleeve and unscrew the screws of the water pump to remove it and replace it with the new one.


Posted on 5 May 2024 by ScegliAuto

    Frequently Asked Questions

    • Polo 2001-2009 - Where is the power steering pump located on Volkswagen Polo? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos