Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : Volkswagen Polo 1.2 TSI water pump replacement

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo MK V, MK 5, Polo V, Polo 5, 6R - Years 2009-2017
Part: Pump
Operation: Volkswagen Polo 1.2 TSI water pump replacement

Let's see the main instructions that will allow us to disassemble and replace the water pump of the Volkswagen Polo 1.2 TSI. First of all we open the bonnet of our car and start draining the coolant by disconnecting the hose; then remove the intake manifold and disconnect the pipe connected to the water pump, then disconnecting the thermostat electrical connector, as illustrated in the video. At this point let's unscrew the screws of the water pump, removing it and replacing it with its original spare part.


Posted on 7 May 2023 by ScegliAuto

    Frequently Asked Questions

    • Polo 2001-2009 - Where is the power steering pump located on Volkswagen Polo? Read Answer

How to open the bonnet of the Volkswagen Polo

Let's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again!

Watch the video!


by ScegliAuto

More videos