Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Volkswagen
  4. :
  5. Polo
  6. : How to replace the thermostat in the Volkswagen Polo?

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo IV, MK 4, 9N, Polo 4, MK IV - Years 2001-2009
Part: Thermostat
Operation: How to replace the thermostat in the Volkswagen Polo?

In this tutorial we can see how to replace the thermostat in the Volkswagen Polo, an extremely simple and quick operation. First of all, make sure the engine is completely cold, then open the hood and remove the top cover. Next, remove both the battery and its support, locate the thermostat and disconnect the large connector connected to it, being careful of any liquid leaks. Unscrew the indicated screws, separate the thermostat from the engine, place the replacement and follow the reverse procedure.


Posted on 13 April 2024 by ScegliAuto

    Frequently Asked Questions

    • Polo 2017-2025 - What is the position of the thermostat on the Volkswagen Polo? Read Answer
    • Polo 1994-2003 - Where is the thermostat located in the Volkswagen Polo 1.6 TDI? Read Answer
    • Polo 2017-2025 - Where is the thermostatic valve of the Volkswagen Polo 1.4 TDI located? Read Answer
    • Polo 1994-2003 - Where is the thermostat located on a Volkswagen Polo? Read Answer
    • Polo 2001-2009 - Where is the thermostatic valve of a Volkswagen Polo located? Read Answer
    • Polo 1994-2003 - Where is the thermostat located on a Volkswagen Polo? Read Answer
    • Polo 2001-2009 - Where is the thermostatic valve of the VW Polo diesel located? Read Answer
    • Polo 2001-2009 - Where is the VW Polo thermostat located? Read Answer

How to replace the Ford Transit key battery

Below I will explain how to replace the remote control key battery on the car, take a small screwdriver and pry the rear part of the remote control, (where there is the ring), at which point unhook the back cover and yes will have access to the compartment containing the battery. Always with the help of the small screwdriver, proceed to make the va and lift the battery out of the housing. Then take the new battery (check the type) and place it on the housing, always making sure to position it with the positive pole facing upwards. Finally, close the back cover by re-hooking it to the key.

Watch the video!


by ScegliAuto

More videos