Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Hybrid Battery of the Volkswagen Golf E?

Model: Volkswagen Golf Golf Viii, MK 8, Golf 8 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Battery

See other generations:
Video tutorial

To remove the electric motor battery of the vehicle, follow these steps: position the car on a lift, as the battery is located under the rear floor. Identify the securing bolts and, given its weight of approximately 350 kg, use a hoist to support it once detached from the frame.

Once the hoist is in place and the securing screws are removed, disconnect the electrical connector going to the motor and detach the connections for the battery cooling system. At this point, lower the hoist to ground level and proceed with the necessary interventions.


Updated on 19 May 2026 by ScegliAuto


Related tutorials

Volkswagen Golf (1997-2003 / MK 4, Golf 4, Golf IV) In today's video, see how to replace the service battery in the fourth series of the Volkswagen Golf, specifically the 3-door model from the German m…
Volkswagen Golf (2008-2012 / MK 6, Golf 6, Golf VI, 5K1) Before starting, open the front bonnet of your Volkswagen Golf. Begin by removing the battery cover. Next, loosen the bolts securing the two terminal…
Volkswagen Golf (1997-2003 / MK 4, Golf 4, Golf IV) In this video tutorial, you will see the steps to remove and replace the battery in a Volkswagen Golf. First, open the bonnet of your car and locate …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos