Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service on the Passat B6

Model: Volkswagen Passat B6, 3C - Years: 2005, 2006, 2007, 2008, 2009, 2010
Part: Warning light – error code

See other generations:
Video tutorial

After performing the scheduled maintenance on the vehicle, it will be necessary to clear the service request message that appears on the vehicle's display. To do this, insert the key into the ignition and turn on the ignition.

Press the button located at the end of the right control lever and scroll through the menu until you reach the "set up" option. Then press the OK button, scroll through the menu with the button at the bottom of the lever until you reach the Service option.

At this point, press the OK button again, scroll through the display menu until you reach reset small, press the OK button, and press again to confirm.


Updated on 20 May 2026 by ScegliAuto


Related tutorials

Reset Service Light on Volkswagen Passat
Reset Service Light on Volkswagen Passat
Volkswagen Passat (2010-2014 / B7) In this video tutorial, we will see the main instructions that will allow us to reset the service light for the routine maintenance oil change of a f…
How to Reset the "Service" Light on a Volkswagen Passat
Volkswagen Passat (2010-2014 / B7) Before you begin, sit in the driver's seat of your Volkswagen Passat. Insert the electronic key into the designated slot. Next, press and hold the bu…
Resetting the Service Light and Inspection on a Volkswagen Passat
Resetting the Service Light and Inspection on a Volkswagen Passat
Volkswagen Passat (2010-2014 / B7) Today, we will discover the step-by-step instructions to reset the service light and perform routine maintenance on a Volkswagen Passat. First, get i…

    Frequently Asked Questions

    • Passat 2005-2010 - What is the car radio code of a Volkswagen Passat? Read answer

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos