Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light of the Volkswagen Tiguan

Model: Volkswagen Tiguan 5N, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Tail light

See other generations:
Video tutorial

In this guide, follow the instructions to remove and replace the rear light and its bulbs on the Volkswagen Tiguan. First, open the boot and start unscrewing the fixing screws located on the sides; then, lever the sides of the light to detach and remove it, disconnecting the electrical connector found at the back, as shown in the video.

At this point, replace the bulbs with new ones if necessary; then install the new rear light by applying the reverse procedure of disassembly!


Updated on 24 May 2026 by ScegliAuto


Related tutorials

Replacing the Rear Light on the Volkswagen Tiguan
Replacing the Rear Light on the Volkswagen Tiguan
Volkswagen Tiguan (2007-2016 / 5N, MK 1) Let's look at the instructions that will guide us through the process of dismantling and replacing the rear light on the Volkswagen Tiguan. First, op…
How to Replace the Rear Light Bulbs on a Volkswagen Tiguan
How to Replace the Rear Light Bulbs on a Volkswagen Tiguan
Volkswagen Tiguan (2007-2016 / 5N, MK 1) Do you want to replace the rear light bulbs on your Volkswagen Tiguan? Here’s how to proceed with the disassembly. First, open the boot and remove th…
How to Replace the Rear Light Bulbs on Volkswagen Tiguan
Volkswagen Tiguan (2007-2016 / 5N, MK 1) How to replace the rear light bulbs on Volkswagen Tiguan? Let's see how to proceed with the disassembly: first, open the boot lid and use a lever to …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos