Do it yourself
| ||||
|
Volkswagen Bora - Video tutorial
Model: Volkswagen Bora
MK 7
- Years 2005-2010 In this video tutorial we can see how to replace the window control panel in the Volkswagen Bora, following a few simple steps: if the control panel is worn and the buttons are blocked, it must be replaced with a new one that can also be purchased on Amazon . The first thing to do is open the door of the car and remove the handle stop as shown in the video; next step you have to remove the handle upwards; once the handle is removed, you must identify the pin and remove it; at this point it is necessary to simply unscrew the push-button panel with a Phillips screwdriver; once the push-button panel has been extracted, you must replace it with the new one and reassemble all the parts by proceeding backwards.
Posted on 31 May 2022 by ScegliAuto
Other guides that may interest you
|
How do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.024
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |