Do it yourself
Frequently asked questions about cars and motorcycles

Instructions for Door Alignment

Model: Volkswagen Bora MK 6 - Years 1998-2005
Part: Car door

It may happen that the door hinges can become loose over time, causing the door to sag slightly: this can be easily noticed as the lock hits the anchoring hinge during closing, and the door tends to rise during the closure. To adjust the door, it is necessary to slightly loosen the hinge retaining bolts: to access these bolts, you need to remove the front wing and the plastic trim from the lower part of the door. Once the bolts are loosened, adjust the door and retighten.

Updated on 9 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Bora (1998-2005 / MK 6) In this brief guide, you will see the steps to adjust the height of the front headlights of the Volkswagen Bora, as well as the Jetta and Golf. First…
Volkswagen Bora (1998-2005 / MK 6) To remove the external wing mirror, first detach the door panel: remove the handle cover to access the screws underneath; also unscrew the screws loc…
Volkswagen Bora (1998-2005 / MK 6) Almost all German-manufactured cars have an additional panel beneath the door trim, usually made of aluminium, which serves a sound-absorbing functio…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos