Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Outer Handle on a Volkswagen Bora?

Model: Volkswagen Bora MK 6 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Handle

See other generations:
Video tutorial

As shown in this tutorial, removing the front outer handle on a Volkswagen Bora is an extremely simple and quick operation. First, open the relevant door, then remove the small cap located on the inner edge and, using a Torx T20 screwdriver, unscrew the bolt accessible through the hole.

Once done, pull the lock cylinder outwards, push the indicated lock using a flat-head screwdriver, and detach the handle by pulling it towards you. To fit the replacement, simply follow the reverse procedure.


Updated on 29 June 2026 by ScegliAuto


Related tutorials

How to Remove the Door Panel of the Volkswagen Bora - Golf - Jetta
How to Remove the Door Panel of the Volkswagen Bora - Golf - Jetta
Volkswagen Bora (1998-2005 / MK 6) This guide illustrates how to dismantle and replace the front door panel of the Volkswagen Bora, as well as the Golf and Jetta. First, open the front…
How to Remove the Door Panel on a VW Bora
How to Remove the Door Panel on a VW Bora
Volkswagen Bora (2005-2010 / MK 7) In this guide, learn how to remove the door panel on a Volkswagen Bora. Start by unscrewing the screws around the perimeter of the door with a screwd…
Removing the Window Regulator Motor on Volkswagen Bora - Jetta MK4
Removing the Window Regulator Motor on Volkswagen Bora - Jetta MK4
Volkswagen Bora (2005-2010 / MK 7) In this video, follow the instructions to remove and replace the window regulator motor on a Volkswagen Bora and Jetta MK4. First, open the front doo…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos