Do it yourself
| ||||
|
Volkswagen Bora - Video tutorial
Model: Volkswagen Bora
MK 7
- Years 2005-2010 We see in this video the instructions that will allow us to disassemble and replace the window lifter motor on a Volkswagen Bora and Jetta MK4. First of all we open the front door and we go to disassemble the door panel, unscrewing all the fixing screws; then we disconnect the electrical connector of the windows and the cable of the handle. Once removed definitively we go to unscrew the screws that we find on the internal panel, with a 10 mm wrench; now disconnect the window motor connector and unscrew its fixing screws with a T30 torx wrench. We just have to remove it and replace it with the new one!
Posted on 25 January 2024 by ScegliAuto
Other guides that may interest you
|
How do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.040
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |