Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Volkswagen
  4. :
  5. Bora
  6. : How to remove the headlights on the Volkswagen Bora - Jetta

Volkswagen Bora - Video tutorial

Model: Volkswagen Bora MK 6 - Years 1998-2005
Part: Headlight
Operation: How to remove the headlights on the Volkswagen Bora - Jetta

In today's video we will see the main steps to remove the headlights and the front bumper on the Volkswagen Bora, but also on the Jetta of the same series. First we are going to remove the air intakes that we find on the lower part of the bumper, pulling them towards you; after which we remove the front mask in the same way and unscrew the fixing screws that we find on the wheel arches and on the upper part of the bumper to remove the latter, as shown in the video. At this point we are going to unscrew the fixing screws of the front lights; we disconnect the electrical connectors of the bulbs to remove and replace them!


Posted on 28 February 2024 by ScegliAuto

Other guides that may interest you

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos