Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Grille and Emblem of the Volkswagen Passat CC

Model: Volkswagen Passat Cc MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Grille

Video tutorial

Let's see how to replace the front grille of a Volkswagen Passat CC: you can find the new grille on AliExpress with the code 1005007886244165 for £62.15, with free delivery. Unscrew the three T25 Torx screws that secure the grille: one in the centre, one on the passenger side, and one on the driver side.

The grille is then held by plastic clips that you will release by pulling them towards you; the most critical points are the upper corners. Start from one upper corner and then work along the sides.

There is also a plastic tab that overlaps; pull in the correct direction to release it. The emblem is a separate piece that attaches to the grille with clips on the back. To remove it, use your fingers or a flat screwdriver to gently press the tabs from the other side of the grille.

Now you need to align the new grille; this is a delicate step. The new grille has a lip that must slide into a groove in the bumper, while the clips must align with the holes; it requires patience.

Once positioned correctly, you can re-screw the three T25 screws. In summary, removing it is easy, but refitting it is a bit more complicated.


Posted on 3 June 2026 by ScegliAuto


Related tutorials

Volkswagen Passat Cc (2008-2018 / MK 1) Removing the front grille of your Volkswagen Passat CC may seem like a complex task. In reality, it is very simple, and by following the steps descri…
Volkswagen Passat Cc (2008-2018 / MK 1) This video shows how to remove the front grille of a Volkswagen Passat CC, which also contains the Volkswagen logo. You may want to remove it to pain…
Volkswagen Passat Cc (2008-2018 / MK 1) Follow this simple guide to remove the roof lining or upper trim of the roof on the Volkswagen Passat and Passat CC. First, get inside the vehicle an…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos